Built To Last

8%

Pressure washer spraying and cleaning an exterior surface
Painting & Washing

Power Washing

Siding, decks, drives, and walkways cleaned at safe pressure

(203) 525-6236
  • Free written estimates
  • Open 24/7
  • 18 CT towns
Overview

Power Washing in Central & Southern Connecticut

Pressure is a tool, not the goal. Too much of it drives water behind siding, etches soft wood, and strips the surface off concrete. Ever Pro Builders matches pressure and nozzle to each surface, and uses low-pressure soft washing with the correct cleaning solution where that's what the material needs.

House exteriors, decks and fences, driveways, walkways, patios, and roof washing for algae streaking — cleaned properly without damaging what's underneath.

What's Included

Every power washing project covers

  • Soft washing for siding and painted surfaces
  • Deck and fence cleaning before staining
  • Driveway, walkway, and patio cleaning
  • Low-pressure roof algae treatment
  • Landscaping rinsed and protected
  • Surface-appropriate cleaning solutions
Our Process

Four steps from first call to final walkthrough

01

Identify the Surface

Material and condition determine pressure, nozzle, and whether soft washing is the right call.

02

Protect the Area

Plantings pre-wet and covered, fixtures and openings protected before we start.

03

Clean the Right Way

Solution applied and dwelled where needed, then rinsed at pressure the surface can take.

04

Final Rinse

Everything rinsed down, plantings flushed, and the area left clean and clear.

Why It Matters

The difference a careful job makes

Four things that separate power washing done properly from work that looks fine on the day and fails a season later.

01

High pressure damages siding

Forcing water up under laps puts it behind the wall — the exact opposite of what siding is for.

02

Wood etches permanently

Too much pressure raises the grain and leaves wand marks in decking that no stain will hide.

03

Roof algae needs chemistry

Those black streaks are a living organism. Low pressure and the right solution remove it; high pressure just removes granules.

04

Clean before you coat

Any stain or paint applied over a dirty surface fails early. Washing is step one of every finish job.

FAQ

Power Washing questions, answered

Ready When You Are

Get a free estimate for power washing

Share a few details about your property and we'll come out, take photographs, and send a clear written quote. No pressure, no obligation.

(203) 525-6236